Re² pellet heating
Re² pellet heating is one of the most manageable heating systems on the market. With often tight spaces and high prices per square meter also a...
Pellet heating systems are excellent heating systems that convince by using renewable energy with low emissions and high efficiency. Heating with pellets is almost indispensable today. The renewable, CO2-neutral and inexpensive fuel is convincing in every respect. In Switzerland, there is a reliable, nationwide supply throughout the year.
The pellet heaters in the power range 3 - 260 kW are particularly suitable for single or multi-family houses as well as for medium-sized commercial enterprises.
Are you replacing a fossil gas or oil heating system with a renewable heating system? Benefit from attractive subsidies.
The pollution of the air by a wood central heating system is minimal. Measurements by chimney sweeps prove this. Controlled burning of the fuel takes place. Air pollution is mainly caused by fireplaces and tiled stoves.
Current data from Holzenergie Schweiz show that a good 20 % of domestic energy wood is still available. The surge in demand for wood in recent times will level off again. With the fuel wood, regional value creation is promoted.
Heating with wood isCO2 neutral. What does that mean? When wood is burned, only as much carbon dioxide is released into the environment as the wood also absorbed during its growth. With oil and gas, only pollutants are released.
An important prerequisite for optimal combustion is the correct storage of the fuel; wood log should be well ventilated and stored in a dry place for approx. 2 - 3 years, depending on the thickness. Too moist or dirty lump wood is not only uneconomical to burn, but can also lead to more pollutant emissions at low combustion temperatures.
In principle, an oil tank can be replaced 1:1 and the existing space can continue to be used.
Benefit from our many years of experience and let our specialists advise you individually, without obligation and free of charge.
The Schmid AG pellet furnace has different features depending on the version. The primary and secondary air is supplied via EC fans. In addition, an air damper is also controlled. The combustion chamber is constantly monitored in negative pressure. The EC flue gas fan regulates to a changing flue draught as well as to an optimized combustion. The touch display of the boiler control offers maximum ease of use, thanks to its simple and clear menu control and fast response speed. It controls the entire heating system, from fuel supply and combustion to heating circuits and energy storage. Decoupled drive forces and automatic reversing via current measurement of the fuel feed screws, rotary valves and ash screws causes foreign bodies to be loosened. Reversing can also be controlled manually. Due to the sophisticated system of combustion chamber geometry, made of high-quality refractory concrete, even moist fuels up to M40 can be fed to the combustion. This heavy-duty design promises a long service life as well as additional safety thanks to combustion chamber temperature sensor, vacuum control and lambda probe. Specially designed containers ensure convenient ash disposal. The type and position of the containers can be planned variably. This allows ideal positioning in the boiler room. Special solutions with filter ash into a container are possible.
Wood pellets consist of natural wood. The wood shavings and sawdust produced in the wood industry, which are available in large quantities as a by-product, are compressed and pelletized. They are the optimal fuel for fully automatic wood heating systems, as they can be easily stored and have a high calorific value with minimal emissions due to their high energy density. They are mostly produced regionally and thus support the value chain of local producers.